These high-performance 1.2V low-voltage DDR4 SODIMM memory from Crucial are designed for space-restricted devices such as laptops, notebook computers and 6th Gen Intel's Next Unit of Computing (NUC) machines.
In the ever-changing world of technology, any component more than five years old is usually in need of an update. At seven years old and counting, that's where DDR3 memory is at: laptops can only do so much with it. Since the introduction of DDR3 memory technology in 2007, processors have doubled in capability, SSDs have revolutionised throughput, and graphics cards have drastically increased frame rates, leaving memory as a limiting factor. With Crucial DDR4 SODIMMs, crush the DDR3 memory bottleneck and unlock a new standard of performance.
Features
- DDR4 specification gives performance comparable to full-size desktop memory
- All Crucial memory modules have a lifetime manufacturer warranty
- Fast 2133MHz / PC4-17000 access speed gives fantastic performance
- Low-voltage Small Outline Dual In-line Memory Module fits 6th Gen Intel NUC, laptops, etc. *
- Low-voltage Small Outline Dual In-line Memory Module fits Intel NUC, laptops, etc. †
Crucial 16G DDR4 2400 MHz SO-DIMM Variation. Crucial DDR4 19200 memory 2400MHz 16GB PC4 SO-DIMM CL17 Notebook 260Pin RAM 1.2V. M471A2K43BB1-CRC Samsung 16GB PC4-19200 DDR4-2400MHz non-ECC Unbuffered CL17 260-Pin SoDimm 1.2V Dual Rank Memory Module $ 65.99 (6 Offers). A-Tech 16GB DDR4 2400MHz SODIMM PC4-19200 2Rx8 Non-ECC CL17 1.2V 260-Pin SO-DIMM Laptop Notebook Computer RAM Memory Upgrade Module 4.8 out of 5 stars 181 $53.99 $ 53.
Compatible with 260-pin SO-DIMM slots, this 128GB DDR4 memory upgrade comes in four 32GB modules and has a 2666 MHz clock speed, a bus speed of PC4-21300, and a low-noise, 8-layer PCB design. Operating at 1.2V, this memory upgrade is designed to meet or exceed Apple's and Intel's specifications.
- *DDR4 SODIMM 16GB Sng, DDR4 SODIMM 4GB Sng, DDR4 SODIMM 8GB Sng only
- †DDR4 SODIMM 16GB, DDR4 SODIMM 32GB only
More Energy Efficient
Extend battery life by using less power. Operating at just 1.2V compared to 1.5V for standard DDR3 memory, Crucial DDR4 SODIMMs consume 20% less voltage than standard DDR3 technology. Crucial DDR4 SODIMMs also contain other efficiency features, for an overall power reduction of up to 40%
More Density
Pack more memory into your laptop than ever before. Crucial DDR4 SODIMMs debut in densities up to 4GB, and as DDR4 technology develops, modules are projected to hit 32GB — allowing you to install twice as much memory as you could in a DDR3 system. Since laptops only have 1-2 memory slots, high-density Crucial DDR4 SODIMMs allow you to overcome this limitation and install more memory for faster mobile performance.
More Speed
Load applications faster and run demanding programs without lag. Crucial DDR4 SODIMMs debut at 2133 MT/s —more than 30% faster than DDR3 modules.
More Bandwidth
Effortlessly multitask between apps and empower your system to fire on all cylinders. Crucial DDR4 SODIMMs increase memory bandwidth by over 30%, allowing your system to handle more data at once. Crucial DDR4 SODIMMs are optimised for next-gen platforms, allowing you to maximise bandwidth.
UDOO BOLT features 2x 260-pin SO-DIMM sockets for DDR4 memory (CN2 and CN3).
- Supports 4GB, 8GB and 16GB DDR4 SO-DIMMs up to maximum 32GB.
- Supports 1.2v DDR4-2400 SO-DIMM ECC and non-ECC memories with dual channel architecture.
In order to exploit the Dual-Channel mode make sure that you install memory modules of the same type and density in different channel DIMM slots.
If you want to use only 1 SO-DIMM module you can install it into either SO-DIMM slot CN2 or slot CN3.If you want to use 2 SO-DIMM modules you can install it into both the SO-DIMM slots CN2 and CN3.
Memory Modules Installation
Please only install DDR4 SO-DIMMs on UDOO BOLT. Only DDR4 are compatibles with UDOO BOLT, as there are physical differences between DDR3 and DDR4 memory modules. Check that all the notches line up with the DDR4 SO-DIMM slot to ensure you have the correct DIMM.
Follow these steps to install the RAM modules:
- Pull both clips on either side of the slot outwards. Align the RAM SO-DIMM module with the slot.
- Press the module straight down until the plastic clips tick and close. Ensure that the module fits tightly into the SO-DIMM slot. Push the clips inwards to check.
MOdule removal from a socket: gently spread the socket's retention arms to disengage them from the SO-DIMM module.
Bobby flay casino restaurant menu. Heads up! Do not touch the RAM module contact edge to avoid damaging it.
Validated modules
Pack more memory into your laptop than ever before. Crucial DDR4 SODIMMs debut in densities up to 4GB, and as DDR4 technology develops, modules are projected to hit 32GB — allowing you to install twice as much memory as you could in a DDR3 system. Since laptops only have 1-2 memory slots, high-density Crucial DDR4 SODIMMs allow you to overcome this limitation and install more memory for faster mobile performance.
More Speed
Load applications faster and run demanding programs without lag. Crucial DDR4 SODIMMs debut at 2133 MT/s —more than 30% faster than DDR3 modules.
More Bandwidth
Effortlessly multitask between apps and empower your system to fire on all cylinders. Crucial DDR4 SODIMMs increase memory bandwidth by over 30%, allowing your system to handle more data at once. Crucial DDR4 SODIMMs are optimised for next-gen platforms, allowing you to maximise bandwidth.
UDOO BOLT features 2x 260-pin SO-DIMM sockets for DDR4 memory (CN2 and CN3).
- Supports 4GB, 8GB and 16GB DDR4 SO-DIMMs up to maximum 32GB.
- Supports 1.2v DDR4-2400 SO-DIMM ECC and non-ECC memories with dual channel architecture.
In order to exploit the Dual-Channel mode make sure that you install memory modules of the same type and density in different channel DIMM slots.
If you want to use only 1 SO-DIMM module you can install it into either SO-DIMM slot CN2 or slot CN3.If you want to use 2 SO-DIMM modules you can install it into both the SO-DIMM slots CN2 and CN3.
Memory Modules Installation
Please only install DDR4 SO-DIMMs on UDOO BOLT. Only DDR4 are compatibles with UDOO BOLT, as there are physical differences between DDR3 and DDR4 memory modules. Check that all the notches line up with the DDR4 SO-DIMM slot to ensure you have the correct DIMM.
Follow these steps to install the RAM modules:
- Pull both clips on either side of the slot outwards. Align the RAM SO-DIMM module with the slot.
- Press the module straight down until the plastic clips tick and close. Ensure that the module fits tightly into the SO-DIMM slot. Push the clips inwards to check.
MOdule removal from a socket: gently spread the socket's retention arms to disengage them from the SO-DIMM module.
Bobby flay casino restaurant menu. Heads up! Do not touch the RAM module contact edge to avoid damaging it.
Validated modules
Here you can find the RAM modules validated and tested with the UDOO BOLT, part of the family product Transcend DDR4-2400 SO-DIMM
- Transcend TS512MSH64V4H (RAM SO-DIMM Module 4GB (512Mx8 - 1Rx8) DDR4 1.2V PC4-2400 non-ECC - Lead Free)
- Transcend TS1GSH64V4B (RAM SO-DIMM Module 8GB (1024Mx8 - 1Rx8) DDR4 1.2V PC4-2400 non-ECC CL=17 - Lead Free)
- Transcend TS2GSH64V4B (RAM SO-DIMM Module 16GB (1024Mx8 - 2Rx8) DDR4 1.2V PC4-2400 non-ECC CL=17 - Lead Free)
Please always use SO-DIMM modules with the same technical specification.
Info In this thread of the UDOO Forum you can find an unofficial but useful discussion about others compatible memories: UDOO BOLT Memory Compatibility List
2400 Mhz Ddr4 So Dimm
This page was last updated on Wednesday, December 9, 2020 at 6:58 AM.